A Complete Troubleshooting Guide for Textile and Garment Manufacturers
Sublimation printing is widely used for polyester garments, sportswear and customised textile products. However, colour fading, ghosting, white spots, blurry images and uneven transfer can affect print quality and production consistency.
In this guide: Understand common sublimation printing defects, identify their possible causes and learn practical methods to improve transfer quality.
1. What Is Sublimation Printing?
Sublimation printing is a digital printing process in which special sublimation ink is transferred to a suitable polyester-based or polymer-coated substrate using controlled heat and pressure. During the process, the sublimation dye changes into a gas and penetrates the compatible substrate. After cooling, the colour becomes part of the material rather than remaining as a conventional surface ink layer. Sublimation printing is commonly used for:- Polyester sportswear and activewear.
- Team jerseys and uniforms.
- All-over printed garments.
- Polyester fabric panels.
- Suitable polymer-coated promotional products.
2. Common Sublimation Printing Problems
Sublimation defects can originate from different stages of production, including artwork preparation, printer operation, transfer-paper handling, fabric preparation and heat transfer. Common problems include:- Faded or washed-out colours.
- Ghosting or double-image effects.
- White spots and missing print areas.
- Uneven colour or patchy transfer.
- Blurry edges and loss of image detail.
- Incorrect colour reproduction.
- Fabric yellowing or heat marks.
- Creases and unwanted marks during transfer.
- Ink bleeding or colour spreading.
3. Faded or Washed-Out Sublimation Prints
One of the most common sublimation problems is a final print that appears pale, dull or less vibrant than the original design. Possible causes:- Incorrect heat-transfer conditions.
- Insufficient heat exposure for the selected substrate.
- Unsuitable fabric composition or low polyester content.
- Incorrect sublimation paper or paper loading.
- Low ink output or incomplete printer nozzle performance.
- Incorrect colour-management settings or ICC profile.
- Incompatible or poor-quality substrate.
- Confirm that the fabric or substrate is approved for sublimation.
- Check the printer nozzle condition and print quality before transfer.
- Verify the correct paper type and printing settings.
- Check the heat press temperature and dwell time against the supplier’s recommendations.
- Review the ICC colour profile and printer colour-management settings.
- Compare the transferred sample with an approved colour reference.
Do not correct faded colour by randomly increasing temperature or pressing time. First identify whether the problem comes from the printer, ink, paper, substrate or transfer conditions.
4. Ghosting: Why Does a Double Image Appear?
Ghosting occurs when a faint second image or shadow appears beside the original design. It usually happens when the transfer paper or fabric moves during the heat-transfer process. Common causes:- Transfer paper shifting when the heat press is opened or closed.
- Insufficient securing of the transfer paper.
- Movement of the garment or substrate during handling.
- Incorrect tension or positioning during roll-to-roll transfer.
- Paper and fabric moving at different rates.
- Position the transfer paper accurately before pressing.
- Use suitable heat-resistant fixing tape where appropriate.
- Keep the garment and transfer paper stable during the transfer process.
- Avoid unnecessary movement immediately after pressing.
- Check paper tension and alignment in continuous production.
- Inspect the first production sample before proceeding with bulk output.
5. White Spots and Missing Colour Areas
White spots appear as small unprinted areas or irregular gaps within the transferred design. They may be caused by contamination, moisture or poor contact between the transfer paper and substrate. Possible causes:- Dust, lint, hair or loose fibres on the fabric.
- Moisture in the fabric or transfer paper.
- Wrinkles or creases during transfer.
- Uneven contact between the paper and substrate.
- Contamination on the pressing surface.
- Printer nozzle problems causing missing ink before transfer.
- Keep fabric and transfer paper in clean storage conditions.
- Inspect and clean the garment surface before transfer.
- Check printed transfer paper for missing ink before application.
- Follow the supplier’s recommended moisture-control and preparation procedure.
- Ensure that the transfer paper lies flat against the fabric.
- Keep the heat press surface clean.
6. Uneven Colour and Patchy Transfer
Uneven transfer occurs when different areas of the same design show different colour intensity or saturation. For example, one side of a garment panel may appear darker while another side looks lighter. Possible causes:- Uneven heat distribution across the press.
- Inconsistent pressure.
- Uneven substrate thickness.
- Wrinkles or seams affecting contact.
- Incorrect positioning of the material.
- Inconsistent transfer-paper quality.
- Variations in fabric composition or surface characteristics.
- Check the heat press for temperature consistency across the working area.
- Inspect the pressing pad and platen condition.
- Ensure the garment or fabric panel is positioned correctly.
- Check for seams, folds or raised areas that may affect contact.
- Use consistent transfer paper and fabric lots for production.
- Record the approved process settings for repeat orders.
7. Blurry Edges and Loss of Image Detail
Blurry sublimation prints may show soft edges, unclear details or reduced sharpness compared with the original artwork. Possible causes:- Low-resolution artwork.
- Incorrect image sizing or scaling.
- Transfer paper movement during pressing.
- Excessive or unsuitable transfer conditions.
- Incorrect printer settings.
- Ink spreading or moisture-related image distortion.
- Use artwork with sufficient resolution for the final print size.
- Check the original image before sending it to production.
- Verify the printer’s resolution and media settings.
- Keep the transfer paper stable during pressing.
- Compare the printed transfer paper with the final transferred image.
8. Incorrect Colours and Colour Shifting
Sometimes the final transferred colour does not match the artwork displayed on the computer or the approved sample. Possible causes:- Incorrect or missing ICC colour profile.
- Inconsistent printer and software colour settings.
- Different sublimation ink or paper combinations.
- Variation in fabric composition or colour.
- Different heat-transfer conditions.
- Monitor display differences.
- Use the appropriate ICC profile for the printer, ink and paper combination.
- Maintain consistent software and printer settings.
- Use the approved fabric and transfer-paper specification.
- Prepare a colour test chart before bulk production.
- Compare the final transfer under consistent lighting conditions.
- Maintain colour approval records for repeat orders.
9. Fabric Yellowing, Scorching and Heat Marks
Heat-sensitive fabrics may develop unwanted marks or changes in appearance during sublimation. These may include yellowing, shiny areas, flattened texture or visible press outlines. Possible causes:- Excessive heat exposure for the selected fabric.
- Unsuitable pressing duration.
- Fabric sensitivity to heat.
- Uneven pressure or direct contact with the pressing surface.
- Unsuitable protective materials.
- Check the fabric’s heat resistance before production.
- Follow the substrate and transfer supplier’s technical instructions.
- Use suitable protective materials where recommended.
- Inspect the pressing pad and surface condition.
- Conduct a test on the actual fabric before bulk production.
10. Sublimation Troubleshooting Chart
| Defect | Possible Cause | Recommended Check |
|---|---|---|
| Faded colour | Transfer conditions or substrate incompatibility | Ink, paper, fabric and press settings |
| Ghosting | Transfer paper movement | Paper fixing and alignment |
| White spots | Dust, lint or moisture | Fabric cleanliness and material preparation |
| Uneven colour | Uneven heat or pressure | Platen condition and contact consistency |
| Blurry image | Low resolution or movement | Artwork quality and paper stability |
| Wrong colour | Colour-management variation | ICC profile and approved colour sample |
| Yellowing or heat marks | Heat-sensitive fabric or unsuitable exposure | Fabric heat resistance and process conditions |
11. Quality Control Checklist Before Bulk Production
- ☐ Confirm fabric composition and sublimation compatibility.
- ☐ Check artwork resolution and final print dimensions.
- ☐ Verify printer nozzle condition and print quality.
- ☐ Confirm the correct sublimation paper and ink.
- ☐ Check the applicable ICC profile and colour settings.
- ☐ Inspect transfer paper for creases and moisture.
- ☐ Clean the garment and pressing surface.
- ☐ Verify heat press condition and temperature consistency.
- ☐ Check transfer-paper alignment and stability.
- ☐ Approve the first transferred sample.
- ☐ Inspect colour, sharpness, spots and fabric appearance.
- ☐ Record approved production settings and material details.
12. Best Practices for Consistent Sublimation Quality
Maintain printer quality: Regularly inspect print heads, nozzle performance and ink delivery. Control material storage: Store transfer paper and fabric in suitable conditions according to supplier recommendations. Standardise colour management: Maintain consistent ICC profiles, software settings and approved colour references. Check equipment: Monitor heat press condition, platen uniformity and pressure consistency. Control fabric quality: Confirm composition, construction and compatibility before production. Document the process: Keep records of ink, paper, fabric lot, approved settings and quality inspection results. Test before bulk production: Use an actual production fabric sample rather than relying only on a general test substrate.13. Frequently Asked Questions (FAQ)
Possible causes include unsuitable fabric, incomplete transfer, incorrect printer settings, poor ink delivery or colour-management problems. Check the complete printing and transfer process before changing settings.
Ghosting commonly occurs when the transfer paper or substrate moves during the heating process, creating a second, offset image.
Dust, lint, loose fibres, moisture or poor contact between the transfer paper and fabric can prevent colour from transferring evenly.
Traditional sublimation is designed for polyester or suitable polymer-coated surfaces. It does not bond to ordinary untreated cotton in the same way it bonds to polyester.
Monitor calibration, ICC profiles, ink, paper, fabric and transfer conditions can all affect the final colour. Use a colour test and approved physical sample for production decisions.
Check heat and pressure consistency, substrate positioning, fabric thickness and transfer-paper contact. Inspect the press and approve a sample before bulk production.
14. Conclusion
Sublimation printing problems such as faded colours, ghosting, white spots, blurry images and uneven transfer can affect the appearance and consistency of finished garments.
Successful sublimation production depends on compatible materials, reliable printer performance, correct colour management, stable transfer-paper positioning and controlled heat-transfer conditions.
Identify the actual source of each defect, test the correction on production fabric and maintain documented quality standards before bulk manufacturing.
Technical References
- Sappi – Manual: Dye Sublimation
- City of San Diego – Dye Sublimation Guide
- Cricut – Troubleshooting Heat Transfer Results
- Brother – Troubleshooting Faded Sublimation Transfers
Technical note: Sublimation results vary according to ink, printer, transfer paper, fabric composition, substrate construction and equipment. Always follow the current supplier technical instructions and validate process conditions on actual production material.
